Jeep Ventline Kit
The Ventline. Are we running out of ideas? Nope, this one came to us from a customer submitted photo. We liked the idea, but wanted to change it up a bit and give a few options. And here we have our Ventline graphic! A subtle stripe using the factory vent-cove as the center point of the design.
This was a tough one to template for a DIY install, so we only have the 4-door available at this time. JL and JT coming soon!
Fitment is dependent on your type of front fender flare. Offered for both high and low fender models, the "high" fenders are found on all Rubicon models, as well as a few sub-models. These align with the bottom of the hood. The "low" fenders are found on all Sports and Sahara’s, as well as many other sub-models. These sit about 2 inches lower and expose much more of the front fender body. This was originally designed for the high flares, if you order the low version, it will be an added extra piece. Use the original as line up for placement. (Make sure you know your fender type, if you have any questions, please contact us before ordering.)
Five designs are offered with a few 2-color options as follows.
1. SOLID - a simple solid stripe of single color, nothing more.
2. SOLID w/ PINSTRIPE - adds a reverse cut pinstripe (paint color)
3. SOLID w/ OUTLINE (2-COLOR) - adds a color pinstripe around outside edge.
4. SPORT - a trio of reverse cut hashes makes for a sporty look in the vent area
5. SPORT (2-COLOR) - adds the outline color to the Sport version
6. TOPOGRAPHY - reverse cut topo from our solid kit
7. TOPOGRAPHY (2-COLOR) - adds a color outline, topo will be the outline color
As far as colors, we recommend Matte Black, but several standard colors are available. Accent colors are mostly standard colors, but if you are looking for a custom color, call us directly.
Includes both driver side and passenger side.
Kit is cut-to-fit for individual panels.
All vinyl is cast wrap material with air release adhesive and masked with a conformable transfer paper. This layer will visually discolor the graphics but will be removed upon installation for a perfect finish. Installation method is recommended to be done DRY only. If choosing 2 (or more) colors, each color is a layer. We do pre-lay this for you, so you install as one piece. Wrap cast vinyl is known for its long-term durability and easy installation. Expect 2-3 years on horizontal applications and 3-5 on vertical surfaces.
Do not apply over ceramic coatings. Please test surface BEFORE installation. The coating, if present can be buffed with a rubbing compound to allow proper adhesion. You may apply ceramic coating over the vinyl once applied for extended life.
And don't forget, we can add custom text or logos in your graphic, however we do ask that you call or email for these custom inquiries!
While these kits are designed for the DIY'er, we always recommend a professional wrap installer if you're hesitant. However, we have provided you a demo install video on our YouTube channel. <Installation Video> coming soon
Graphic will include pre-mask and a plastic squeegee.
Kit includes IPC (Install Protection Care), please see link for details.
All kits are made to order and are NOT refundable. Please see our Refund Policy <link>.